Huawei S5730-36C-HI Switch
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

Huawei S5730-36C-HI Switch

  • Brand New Condition
  • Original Box Packed
  • Latest Firmware Version
Image
Available:In Stock
$0.00

Huawei S5730-36C-HI switch with 24-port 1000BASE-T, 4-port 10GE SFP+, 2 power slots PN#02351MQJ

Switching capacity: 758Gbps

256K MAC address entries

PoE Not supported

Stack ports: 10GE SFP+ ports on the front panel, or 10GE ports or 40GE QSFP+ ports on the rear card

Rear card slot card supported:
ES5D21Q02Q00
ES5D21X08T00
ES5D21X08S00

SSD card slot Pluggable SSD card supported: SSD-240GB

By converging services and networks, S5730-HI provides the Free Mobility feature to ensure consistent user experience. Its Super Virtual Fabric (SVF) feature virtualizes the entire network into one device for simple management. S5730-HI also provides flexible Ethernet networking options, comprehensive VPN tunnel solutions, various security control methods, intelligent deployment, and simple O&M. As such, S5730-HI is ideal for the access/aggregation layers of large and midsize campus networks and the core layer of campus branches and small campus networks.

 

Item Description
Fixed ports 24×10/100/1000Base-T, 4×10 GE SFP+
Extended slot One extended slot, supporting 8-port 10GE electrical, 8-port 10GE optical, or 2-port 40GE optical interface card
Dimensions mm (W×D ×H) 442×420×44.4
Input voltage AC: Rated AC voltage: 100-240 V AC; 50/60 Hz

Max AC voltage: 90-264 V AC; 47-63 Hz

DC: Rated DC voltage: -48-60 V DC;

Max DC voltage: -38.4-72 V DC

Maximum power consumption (without card) 74 W
Operating temperature 0-1800 m altitude: 0°C to 45°C 1800-5000 m altitude: The operating temperature reduces by 1ºC every time the altitude increases by 220 m.
Relative humidity 5% to 95% (non-condensing)
Heat dissipation Air cooling heat dissipation, intelligent speed adjustment, and pluggable fans
MAC address table

IEEE 802.1d standards compliance

256K MAC address entries

MAC address learning and aging

Static, dynamic, and blackhole MAC address entries

Packet filtering based on source MAC addresses

VLAN 4K VLANs

Guest VLAN and voice VLAN

GVRP

MUX VLAN

VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports

VLAN mapping

Wireless service AP access control, AP domain management, and AP configuration template management

Radio management, unified static configuration, and dynamic centralized management

WLAN basic services, QoS, security, and user management CAPWAP, tag/terminal location, and spectrum analysis

Ethernet loop protection RRPP ring topology and RRPP multi-instance

Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover

SEP

ERPS (G.8032)

BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)

BPDU protection, root protection, and loop protection

MPLS MPLS L3VPN

MPLS L2VPN (VPWS/VPLS)

MPLS-TE

MPLS QoS

IP routing Static routes, RIP v1/2, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, ECMP, routing policy
Interoperability VLAN-Based Spanning Tree (VBST), working with PVST, PVST+, and RPVST

 Link-type Negotiation Protocol (LNP), similar to DTP

VLAN Central Management Protocol (VCMP), similar to VTP

IPv6 features Neighbor Discover (ND)

 PMTU

IPv6 Ping, IPv6 Tracert, IPv6 Telnet

ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports, or protocol types

Multicast Listener Discovery snooping (MLDv1/v2)

IPv6 addresses configured for sub-interfaces, VRRP6, DHCPv6, and L3VPN

Multicast IGMP v1/v2/v3 snooping and IGMP fast leave

 Multicast forwarding in a VLAN and multicast replication between VLANs

Multicast load balancing among member ports of a trunk Controllable multicast

Port-based multicast traffic statistics

IGMP v1/v2/v3, PIM-SM, PIM-DM, and PIM-SSM

MSDP

MVPN

QoS/ACL Rate limitation in the inbound and outbound directions of a port

Packet redirection

Port-based traffic policing and two-rate three-color CAR Eight queues on each port

DRR, SP and DRR+SP queue scheduling algorithms

WRED

Re-marking of the 802.1p and DSCP fields of packets Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID Queue-based rate limitation and shaping on ports

Security Hierarchical user management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense

Binding of the IP address, MAC address, port number, and VLAN ID Port isolation, port security, and sticky MAC

MAC Forced Forwarding (MFF) Blackhole MAC address entries

Limit on the number of learned MAC addresses

IEEE 802.1x authentication and limit on the number of users on a port

AAA authentication, RADIUS authentication, and HWTACACS authentication

NAC

SSH V2.0

HTTPS CPU protection

Blacklist and whitelist

Attack source tracing and punishment for IPv6 packets such as ND, DHCPv6, and MLD packets

Secure Boot

IPSec

Reliability LACP

 

E-trunk

Ethernet OAM (IEEE 802.3ah and IEEE 802.1ag)

ITU-Y.1731

DLDP

LLDP

BFD for BGP, BFD for IS-IS, BFD for OSPF, BFD for static route

VXLAN Supports VXLAN L2 and L3 gateways

Centralized and distributed gateway

BGP-EVPN

Configured through the NETCONF protocol

Super Virtual Fabric (SVF) Working as an SVF Parent node to vertically virtualize downlink switches and APs as one device for management. A two-layer client architecture is supported.

IGMP snooping can be enabled on access switches (ASs) and the maximum number of access users on a port can be configured.

ASs can be independently configured. Services that are not supported by templates can be configured on the parent. Third-party devices are allowed between SVF parent and clients.

Working as an SVF Client node that is plug-and-play with zero configuration

iPCA Directly coloring service packets to collect real-time statistics on the number of lost packets and packet loss ratio

Collection of statistics on the number of lost packets and packet loss ratio at network and device levels

TWAMP Two-way IP link performance measurement

Measurement on two-way packet delay, one-way packet loss rate, and one-way packet jitter

Management and maintenance iStack

 Virtual cable test

SNMP v1/v2c/v3

RMON

Web-based NMS System logs and alarms of different levels GVRP

MUX VLAN

802.3az Energy Efficient Ethernet (EEE)

NetStream

Dying gasp upon power-off

 

Huawei S5730-36C-HI switch with 24-port 1000BASE-T, 4-port 10GE SFP+, 2 power slots PN#02351MQJ

Switching capacity: 758Gbps

256K MAC address entries

PoE Not supported

Stack ports: 10GE SFP+ ports on the front panel, or 10GE ports or 40GE QSFP+ ports on the rear card

Rear card slot card supported:
ES5D21Q02Q00
ES5D21X08T00
ES5D21X08S00

SSD card slot Pluggable SSD card supported: SSD-240GB

By converging services and networks, S5730-HI provides the Free Mobility feature to ensure consistent user experience. Its Super Virtual Fabric (SVF) feature virtualizes the entire network into one device for simple management. S5730-HI also provides flexible Ethernet networking options, comprehensive VPN tunnel solutions, various security control methods, intelligent deployment, and simple O&M. As such, S5730-HI is ideal for the access/aggregation layers of large and midsize campus networks and the core layer of campus branches and small campus networks.

 

Item Description
Fixed ports 24×10/100/1000Base-T, 4×10 GE SFP+
Extended slot One extended slot, supporting 8-port 10GE electrical, 8-port 10GE optical, or 2-port 40GE optical interface card
Dimensions mm (W×D ×H) 442×420×44.4
Input voltage AC: Rated AC voltage: 100-240 V AC; 50/60 Hz

Max AC voltage: 90-264 V AC; 47-63 Hz

DC: Rated DC voltage: -48-60 V DC;

Max DC voltage: -38.4-72 V DC

Maximum power consumption (without card) 74 W
Operating temperature 0-1800 m altitude: 0°C to 45°C 1800-5000 m altitude: The operating temperature reduces by 1ºC every time the altitude increases by 220 m.
Relative humidity 5% to 95% (non-condensing)
Heat dissipation Air cooling heat dissipation, intelligent speed adjustment, and pluggable fans
MAC address table

IEEE 802.1d standards compliance

256K MAC address entries

MAC address learning and aging

Static, dynamic, and blackhole MAC address entries

Packet filtering based on source MAC addresses

VLAN 4K VLANs

Guest VLAN and voice VLAN

GVRP

MUX VLAN

VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports

VLAN mapping

Wireless service AP access control, AP domain management, and AP configuration template management

Radio management, unified static configuration, and dynamic centralized management

WLAN basic services, QoS, security, and user management CAPWAP, tag/terminal location, and spectrum analysis

Ethernet loop protection RRPP ring topology and RRPP multi-instance

Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover

SEP

ERPS (G.8032)

BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)

BPDU protection, root protection, and loop protection

MPLS MPLS L3VPN

MPLS L2VPN (VPWS/VPLS)

MPLS-TE

MPLS QoS

IP routing Static routes, RIP v1/2, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, ECMP, routing policy
Interoperability VLAN-Based Spanning Tree (VBST), working with PVST, PVST+, and RPVST

 Link-type Negotiation Protocol (LNP), similar to DTP

VLAN Central Management Protocol (VCMP), similar to VTP

IPv6 features Neighbor Discover (ND)

 PMTU

IPv6 Ping, IPv6 Tracert, IPv6 Telnet

ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports, or protocol types

Multicast Listener Discovery snooping (MLDv1/v2)

IPv6 addresses configured for sub-interfaces, VRRP6, DHCPv6, and L3VPN

Multicast IGMP v1/v2/v3 snooping and IGMP fast leave

 Multicast forwarding in a VLAN and multicast replication between VLANs

Multicast load balancing among member ports of a trunk Controllable multicast

Port-based multicast traffic statistics

IGMP v1/v2/v3, PIM-SM, PIM-DM, and PIM-SSM

MSDP

MVPN

QoS/ACL Rate limitation in the inbound and outbound directions of a port

Packet redirection

Port-based traffic policing and two-rate three-color CAR Eight queues on each port

DRR, SP and DRR+SP queue scheduling algorithms

WRED

Re-marking of the 802.1p and DSCP fields of packets Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID Queue-based rate limitation and shaping on ports

Security Hierarchical user management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense

Binding of the IP address, MAC address, port number, and VLAN ID Port isolation, port security, and sticky MAC

MAC Forced Forwarding (MFF) Blackhole MAC address entries

Limit on the number of learned MAC addresses

IEEE 802.1x authentication and limit on the number of users on a port

AAA authentication, RADIUS authentication, and HWTACACS authentication

NAC

SSH V2.0

HTTPS CPU protection

Blacklist and whitelist

Attack source tracing and punishment for IPv6 packets such as ND, DHCPv6, and MLD packets

Secure Boot

IPSec

Reliability LACP

 

E-trunk

Ethernet OAM (IEEE 802.3ah and IEEE 802.1ag)

ITU-Y.1731

DLDP

LLDP

BFD for BGP, BFD for IS-IS, BFD for OSPF, BFD for static route

VXLAN Supports VXLAN L2 and L3 gateways

Centralized and distributed gateway

BGP-EVPN

Configured through the NETCONF protocol

Super Virtual Fabric (SVF) Working as an SVF Parent node to vertically virtualize downlink switches and APs as one device for management. A two-layer client architecture is supported.

IGMP snooping can be enabled on access switches (ASs) and the maximum number of access users on a port can be configured.

ASs can be independently configured. Services that are not supported by templates can be configured on the parent. Third-party devices are allowed between SVF parent and clients.

Working as an SVF Client node that is plug-and-play with zero configuration

iPCA Directly coloring service packets to collect real-time statistics on the number of lost packets and packet loss ratio

Collection of statistics on the number of lost packets and packet loss ratio at network and device levels

TWAMP Two-way IP link performance measurement

Measurement on two-way packet delay, one-way packet loss rate, and one-way packet jitter

Management and maintenance iStack

 Virtual cable test

SNMP v1/v2c/v3

RMON

Web-based NMS System logs and alarms of different levels GVRP

MUX VLAN

802.3az Energy Efficient Ethernet (EEE)

NetStream

Dying gasp upon power-off

 

GLOBAL SHIPPING
XponShop offers you various options of shipping ways:
-EXW SHENZHEN
-Overseas Express which includes shipping by Carriers, by Air Cargo, and Sea Freight.

Cargo Weight/Volume Suggested Shipping Ways Comments
≤ 45KGS By Shipping Carriers (DHL, UPS, FedEx, etc.) Door to door service, fast and convenient.
>45KGS By Air Cargo Door to airport service, more cost-efficient.
1CBM By Sea Freight Large-volume goods, door to seaport service, longer shipping time but cheaper.

XponShop makes the most commonly used trade terms available for your convenience: CNF, CPT, CIF, DDP, etc to ensure global fast and convenient delivery.
Once you confirm your order, you may contact XponShop team for calculating the freight charges and choose the optimal shipping way.
NOTE:
· Shipping may be subject to local taxes or duties; XponShop is not responsible for and has no control over these charges.
· No matter which shipping ways you chose, cargo insurance is highly recommended in case of unpredictable loss.

RETURN POLICY
We aim to deliver products for your appreciation and satisfaction. XponShop return or replacement policy applies only if the product is damaged or incorrectly delivered.
–If you receive a damaged product or it is different from the one requested, you can return or replace it within 7 days of receipt. In such a case, costs shall be borne by XponShop.
–If the product is malfunctional during use and under 12 months warranty, XponShop support team will contact you to troubleshoot the issue by professional diagnosis. The unsolvable problem will trigger the return procedure: repair, replace and reship to you or refund if repair or replacement is inapplicable.
NOTE:
· Please be aware that the product must be returned to the specified address as defined by shipping incoterms against the sales invoice/contract.
· For further information about how to return products, please contact our XponShop team at sales@xponshop.com, we will advise you on how to proceed.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)