NOKIA Alcatel-Lucent 7360 ISAM FX-8 OLT 19inch Chassis

The Nokia 7360 Intelligent Services Access Manager (ISAM) FX supports a mix of services including VDSL2 with vectoring, point-to-point, GPON, EPON (with DPoE) and 10G PON services. High-bandwidth throughput is guaranteed by backplane technology that enables dual 100Gb/s backplane connections to each line termination (LT) slot.

NOKIA Alcatel-Lucent 7360 ISAM FX-8 belonging to Nokia 7360 ISAM FX system products include the FX-4, FX-8, FX-16 provides 8 service slots, 2 x 100 Gb/s per slot high-capacity backplane, and high-capacity 480Gb/s controllers (NT) with 40Gb/s network capacity (can be used as uplink, downlink or direct user link).

Shelf configuration of 7360 ISAM FX-8

Nokia 7360 ISAM FX Features

• Optional Network Termination Input Output (NTIO) for an additional 80Gb/s network capacity
• Full NT redundancy with Active/Active and load sharing options
• Added resiliency with MPLS, Ethernet Ring Protection Switching (ERPS) (G.8032) and Link Aggregation Group (LAG) support
• Simultaneous support of passive optical network (PON), pointto-point, POTS and VDSL2 with vectoring
• Fully managed by the Nokia 5520 Access Management System (AMS) and 5529 Access Provisioning Center (APC) applications

Nokia 7360 ISAM FX Series Model

The Nokia 7360 Intelligent Services Access Manager (ISAM) FX is a high-capacity access node designed to deliver ultra-broadband services to any number of users in a rapid and cost-effective way. Because there is no single solution to bring ultra-broadband to the masses, the 7360 ISAM FX supports a mix of services including VDSL2 with vectoring, point-to-point, GPON, EPON (with DPoE) and 10G PON services. High-bandwidth throughput is guaranteed by backplane technology that enables dual 100Gb/s backplane connections to each line termination (LT) slot. 

The 7360 ISAM FX system is a frame-based multi-service access platform, offering high-density fiber connections for multimedia, high-speed Internet access, voice, and business services. At the network side, the 7360 ISAM FX terminates FE, GE, or 10GE links. Following are possible configurations.

• Connect to one or more Ethernet switches. Ethernet links can be connected to one or more Ethernet switches. These Ethernet switches forward the frames over the Ethernet-based aggregation access network until they reach the IP edge router or BRAS of the corresponding NSP. At the IP edge router or BRAS, the frames enter the IP backbone of the NSP.

• Connect more than one FE/GE/10GE link (link aggregation). In case of more than one link, Ethernet link aggregation is used.

• Connect directly to an IP edge router. The 7360 ISAM FX can be connected directly to the IP edge router or BRAS. The Ethernet aggregation network is reduced to one or more parallel Ethernet links.

• Connect to a MPLS network. The 7360 ISAM FX is a multiplexer, which can be equipped with the following main cards:
  · NT card (optionally 1+1 redundant): The 7360 ISAM FX NT cards consist of an IHub subsystem and a system control subsystem.
  · NTIO card (optional) (not currently supported)
  · LT cards implementing the user interfaces: The 7360 ISAM FX LT cards provide an IWF, a transport subsystem, and an LT control subsystem.
  · GPON LT cards: The GPON functionality of the 7360 ISAM FX extends the system boundaries up to 128 ONTs over fiber that can reach tens of kilometers from the GPON LT cards located in a 7360 ISAM FX shelf. These GPON LT cards provide the physical interfaces from the 7360 ISAM FX shelf toward the CPE, or the Nokia ONTs.
  · XG-PON1 LT cards: The XG-PON1 functionality of the 7360 ISAM FX provides higher speed data rates of 10G downstream and 2.5G updstream

 GPON,10G XG-PON and point-to-point support

GLOBAL SHIPPING
XponShop offers you various options of shipping ways:
-EXW SHENZHEN
-Overseas Express which includes shipping by Carriers, by Air Cargo, and Sea Freight.

XponShop makes the most commonly used trade terms available for your convenience: CNF, CPT, CIF, DDP, etc to ensure global fast and convenient delivery.
Once you confirm your order, you may contact XponShop team for calculating the freight charges and choose the optimal shipping way.
NOTE:
· Shipping may be subject to local taxes or duties; XponShop is not responsible for and has no control over these charges.
· No matter which shipping ways you chose, cargo insurance is highly recommended in case of unpredictable loss.

RETURN POLICY
We aim to deliver products for your appreciation and satisfaction. XponShop return or replacement policy applies only if the product is damaged or incorrectly delivered.
–If you receive a damaged product or it is different from the one requested, you can return or replace it within 7 days of receipt. In such a case, costs shall be borne by XponShop.
–If the product is malfunctional during use and under 12 months warranty, XponShop support team will contact you to troubleshoot the issue by professional diagnosis. The unsolvable problem will trigger the return procedure: repair, replace and reship to you or refund if repair or replacement is inapplicable.
NOTE:
· Please be aware that the product must be returned to the specified address as defined by shipping incoterms against the sales invoice/contract.
· For further information about how to return products, please contact our XponShop team at sales@xponshop.com, we will advise you on how to proceed.