The H801SCUK board is a Super Control Unit Board
It is the core of the system control and service switching and aggregation
The H801SCUK board can also function as the management and control core of the integrated network management system (NMS)
It communicates with service boards about the key management and control information through the master/slave serial port and inband GE/10GE channel. In this manner, the H801SCUK board configures, manages, and controls the device, and also implements the simple route protocol functions
All SCU boards support the functions as below:
- System control and management unit
- Active/standby switchover
- Local and remote maintenance through maintenance serial port CON or maintenance Ethernet port ETH
- Environmental monitoring through environment monitoring serial port ESC
| Specification | |
| LAN switch | 24 x 10GE + 4 x GE |
| Switching capacity | 480 Gbit/s (active/standby mode) 960 Gbit/s (load sharing mode) |
| Bandwidth per slot | 10 Gbit/s (active/standby mode) 20 Gbit/s (load sharing mode) |
| MAC address table | 32768 |
| Access user | 8192 |
| Multicast user | 8192 |
| Configurable multicast channel | 4096 |
| Concurrent multicast channel | 2000 |
| IPv4 routing table | 5120 |
| IPv6 routing table | 5120 |
| Service port | 32768 |
| ARP table | 8192 |
| ACL rule | 1024 |
| Maximum Frame Size | 2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported. |
| VRF (L3 VPN) | Supported |
| Operating temperature | -25°C to +65°C |
| Power consumption | Static: 30 W Maximum: 50 W |
| Mechanical Specification | |
| Dimensions(mm) | 25.40 (W)x 237.00 (D) x 395.40(H) |
| Weight(kg) | 0.5 |
