Huawei S5720-28X-SI-DC Switch
- Brand New Condition
- Original Box Packed
- Latest Firmware Version
- Category:Huawei,Huawei Switch,S5700 Series
Huawei S5720-28X-SI-DC switch with 24-port 1000BASE-T, including 4-port GE SFP combo, 4-port 10GE SFP+, 2 power slots
Forwarding performance: 96Mpps
Switching capacity: 336Gbps
16K MAC address entries
Huawei S5720-SI Flexible Gigabit Ethernet switches that provide resilient, high-density Layer 3 switching for data centers. Features include multiple-terminals, HD video security, and video conferencing applications. Intelligent iStack clustering, 10 Gbit/s upstream ports and IPv6 forwarding enable use as aggregation switches in enterprise campus networks.
Next-generation reliability, security, and energy-saving technologies make S5720-SI Series Switches easy to install and maintain, and an excellent source of low Total Cost of Ownership (TCO).
Item | Description |
Fixed port | 24 Ethernet 10/100/1000 ports, 4 of which are dual-purpose 10/100/1000 or SFP
P series: 4 Gig SFP;X series: 4 10 Gig SFP+ |
Forwarding performance | 96 Mpps |
Extended slot | NA |
MAC address table | IEEE 802.1d |
16K MAC address entries | |
MAC address learning and aging | |
Static, dynamic, and blackhole MAC address entries | |
Packet filtering based on source MAC addresses | |
VLAN | 4K VLANs |
Guest VLAN and voice VLAN | |
GVRP | |
MUX VLAN | |
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports | |
1:1 and N:1 VLAN Mapping | |
Wireless AC | AP access control, AP domain management, and AP configuration template
management Radio management, unified static configuration, and dynamic centralized management WLAN basic services, QoS, security, and user management CAPWAP, Tag/terminal location, and spectrum analysis |
Jumbo frame | 10K |
IP routing | Static routes, RIP v1/2, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, ECMP,
routing policy |
IPv6 features | Neighbor Discovery (ND) |
Path maximum transmission unit (PMTU) | |
IPv6 Ping, IPv6 Tracert, and IPv6 Telnet | |
6 to4 tunnel, ISATAP tunnel, and manually configur ed tunnel | |
ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports
or protocol types |
|
Multicast Listener Discovery (MLD) v1/v2 snooping | |
Multicast forwarding | IGMP v1/v2/v3 snooping and IGMP fast leave |
Multicast forwarding in a VLAN and multicast replication between VLANs | |
Multicast load balancing among member ports of a trunk | |
Controllable multicast | |
Port-based multicast traffic statistics collection | |
IGMPv1/v2/v3, Protocol Independent Multicast Sparse Mode (PIM-SM), and Protocol Independent | |
Multicast Dense Mode (PIM-DM), and Protocol Independent Multicast Source-Specific Multicast (PIM-SSM) | |
Multicast Source Discovery Protocol (MSDP) | |
QoS/ACL | Rate limitation in the inbound and outbound directions of a port |
Packet redirection | |
Broadcast storm control | |
Port-based traffic policing and two-rate and three-color CAR | |
Eight queues per port,Weighted round robin (WRR), deficit round robin (DRR), strict priority (SP), WRR+SP, and DRR+SP queue scheduling algorithms | |
Weighted random early detection (WRED) | |
Re-marking of the 802.1p priority and DSCP fields of packets | |
Packet filtering on Layer 2 to Layer 4, filtering out invalid fr ames based on the source MAC address, destination MAC address, source IP address, destination IP address,
TCP/UDP source/destination port number, protocol number, or VLAN |
|
Queue-based rate limitation and shaping on ports | |
HQoS | |
Security features | Hierarchical user management and password protection |
DoS attack defense, ARP attack defense, and ICMP attack defense | |
Binding of the IP address, MAC address, interface number, and VLAN ID of a user | |
Port isolation, port security, and sticky MAC | |
MAC Forced Forwarding (MFF) | |
Blackhole MAC address entries | |
Limit on the number of learned MAC addresses | |
IEEE 802.1x authentication and the limit on the number of users on an interface | |
AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH v2.0 | |
Hypertext Transfer Protocol Secure (HTTPS) | |
CPU defense; Blacklist and whitelist; MACSec ready | |
Reliability | RRPP ring topology and RRPP multi-instance |
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover | |
SEP | |
G.8032 Ethernet Ring Protection Switching (ERPS) | |
STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) | |
BPDU protection, root protection, and loop protection | |
Super Virtual Fabric (SVF) | Working as the parent node to vertically virtualize downlink switches and APs as one
device for management |
Supports a two-layer client architecture | |
Management and Maintenance |
Virtual cable test, SNMP v1/v2c/v3, RMON |
Network management system (NMS) and Web managemen | |
System logs and multi-level alarms | |
802.3az EEE | |
GVRP | |
Dying Gasp upon power-off | |
Interoperability | VLAN-Based Spanning Tree (VBST), working with PVST, PVST+, and RPVST |
Link-type Negotiation Protocol (LNP), similar with DTP | |
VLAN Central Management Protocol (VCMP), similar with VTP | |
Operating environment | Operating temperature: 0-1800 m altitude: 0-45℃
1800-5000m altitude: The operating temperature reduces by 1oC every time the altitude increases by 220m. Relative humidity: 5% to 95% (noncondensing) |
Input voltage | AC:
Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 50/60 Hz DC: Rated voltage range: –48 V to –60 V, DC Maximum voltage range: –36 V to –72 V, DC |
Dimensions (mm) | 442 (W) x 420 (D)x 43.6 (H) |
Typical power consumption | 22.3W |
PN. | 02350NGU |
Huawei S5720-28X-SI-DC switch with 24-port 1000BASE-T, including 4-port GE SFP combo, 4-port 10GE SFP+, 2 power slots
Forwarding performance: 96Mpps
Switching capacity: 336Gbps
16K MAC address entries
Huawei S5720-SI Flexible Gigabit Ethernet switches that provide resilient, high-density Layer 3 switching for data centers. Features include multiple-terminals, HD video security, and video conferencing applications. Intelligent iStack clustering, 10 Gbit/s upstream ports and IPv6 forwarding enable use as aggregation switches in enterprise campus networks.
Next-generation reliability, security, and energy-saving technologies make S5720-SI Series Switches easy to install and maintain, and an excellent source of low Total Cost of Ownership (TCO).
Item | Description |
Fixed port | 24 Ethernet 10/100/1000 ports, 4 of which are dual-purpose 10/100/1000 or SFP
P series: 4 Gig SFP;X series: 4 10 Gig SFP+ |
Forwarding performance | 96 Mpps |
Extended slot | NA |
MAC address table | IEEE 802.1d |
16K MAC address entries | |
MAC address learning and aging | |
Static, dynamic, and blackhole MAC address entries | |
Packet filtering based on source MAC addresses | |
VLAN | 4K VLANs |
Guest VLAN and voice VLAN | |
GVRP | |
MUX VLAN | |
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports | |
1:1 and N:1 VLAN Mapping | |
Wireless AC | AP access control, AP domain management, and AP configuration template
management Radio management, unified static configuration, and dynamic centralized management WLAN basic services, QoS, security, and user management CAPWAP, Tag/terminal location, and spectrum analysis |
Jumbo frame | 10K |
IP routing | Static routes, RIP v1/2, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, ECMP,
routing policy |
IPv6 features | Neighbor Discovery (ND) |
Path maximum transmission unit (PMTU) | |
IPv6 Ping, IPv6 Tracert, and IPv6 Telnet | |
6 to4 tunnel, ISATAP tunnel, and manually configur ed tunnel | |
ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports
or protocol types |
|
Multicast Listener Discovery (MLD) v1/v2 snooping | |
Multicast forwarding | IGMP v1/v2/v3 snooping and IGMP fast leave |
Multicast forwarding in a VLAN and multicast replication between VLANs | |
Multicast load balancing among member ports of a trunk | |
Controllable multicast | |
Port-based multicast traffic statistics collection | |
IGMPv1/v2/v3, Protocol Independent Multicast Sparse Mode (PIM-SM), and Protocol Independent | |
Multicast Dense Mode (PIM-DM), and Protocol Independent Multicast Source-Specific Multicast (PIM-SSM) | |
Multicast Source Discovery Protocol (MSDP) | |
QoS/ACL | Rate limitation in the inbound and outbound directions of a port |
Packet redirection | |
Broadcast storm control | |
Port-based traffic policing and two-rate and three-color CAR | |
Eight queues per port,Weighted round robin (WRR), deficit round robin (DRR), strict priority (SP), WRR+SP, and DRR+SP queue scheduling algorithms | |
Weighted random early detection (WRED) | |
Re-marking of the 802.1p priority and DSCP fields of packets | |
Packet filtering on Layer 2 to Layer 4, filtering out invalid fr ames based on the source MAC address, destination MAC address, source IP address, destination IP address,
TCP/UDP source/destination port number, protocol number, or VLAN |
|
Queue-based rate limitation and shaping on ports | |
HQoS | |
Security features | Hierarchical user management and password protection |
DoS attack defense, ARP attack defense, and ICMP attack defense | |
Binding of the IP address, MAC address, interface number, and VLAN ID of a user | |
Port isolation, port security, and sticky MAC | |
MAC Forced Forwarding (MFF) | |
Blackhole MAC address entries | |
Limit on the number of learned MAC addresses | |
IEEE 802.1x authentication and the limit on the number of users on an interface | |
AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH v2.0 | |
Hypertext Transfer Protocol Secure (HTTPS) | |
CPU defense; Blacklist and whitelist; MACSec ready | |
Reliability | RRPP ring topology and RRPP multi-instance |
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover | |
SEP | |
G.8032 Ethernet Ring Protection Switching (ERPS) | |
STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) | |
BPDU protection, root protection, and loop protection | |
Super Virtual Fabric (SVF) | Working as the parent node to vertically virtualize downlink switches and APs as one
device for management |
Supports a two-layer client architecture | |
Management and Maintenance |
Virtual cable test, SNMP v1/v2c/v3, RMON |
Network management system (NMS) and Web managemen | |
System logs and multi-level alarms | |
802.3az EEE | |
GVRP | |
Dying Gasp upon power-off | |
Interoperability | VLAN-Based Spanning Tree (VBST), working with PVST, PVST+, and RPVST |
Link-type Negotiation Protocol (LNP), similar with DTP | |
VLAN Central Management Protocol (VCMP), similar with VTP | |
Operating environment | Operating temperature: 0-1800 m altitude: 0-45℃
1800-5000m altitude: The operating temperature reduces by 1oC every time the altitude increases by 220m. Relative humidity: 5% to 95% (noncondensing) |
Input voltage | AC:
Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 50/60 Hz DC: Rated voltage range: –48 V to –60 V, DC Maximum voltage range: –36 V to –72 V, DC |
Dimensions (mm) | 442 (W) x 420 (D)x 43.6 (H) |
Typical power consumption | 22.3W |
PN. | 02350NGU |
GLOBAL SHIPPING
XponShop offers you various options of shipping ways:
-EXW SHENZHEN
-Overseas Express which includes shipping by Carriers, by Air Cargo, and Sea Freight.
Cargo Weight/Volume | Suggested Shipping Ways | Comments |
≤ 45KGS | By Shipping Carriers (DHL, UPS, FedEx, etc.) | Door to door service, fast and convenient. |
>45KGS | By Air Cargo | Door to airport service, more cost-efficient. |
>1CBM | By Sea Freight | Large-volume goods, door to seaport service, longer shipping time but cheaper. |
XponShop makes the most commonly used trade terms available for your convenience: CNF, CPT, CIF, DDP, etc to ensure global fast and convenient delivery.
Once you confirm your order, you may contact XponShop team for calculating the freight charges and choose the optimal shipping way.
NOTE:
· Shipping may be subject to local taxes or duties; XponShop is not responsible for and has no control over these charges.
· No matter which shipping ways you chose, cargo insurance is highly recommended in case of unpredictable loss.
RETURN POLICY
We aim to deliver products for your appreciation and satisfaction. XponShop return or replacement policy applies only if the product is damaged or incorrectly delivered.
–If you receive a damaged product or it is different from the one requested, you can return or replace it within 7 days of receipt. In such a case, costs shall be borne by XponShop.
–If the product is malfunctional during use and under 12 months warranty, XponShop support team will contact you to troubleshoot the issue by professional diagnosis. The unsolvable problem will trigger the return procedure: repair, replace and reship to you or refund if repair or replacement is inapplicable.
NOTE:
· Please be aware that the product must be returned to the specified address as defined by shipping incoterms against the sales invoice/contract.
· For further information about how to return products, please contact our XponShop team at sales@xponshop.com, we will advise you on how to proceed.