NOKIA Alcatel-Lucent 7360 ISAM FX-4, belonging to Nokia 7360 ISAM FX system products include the FX-4, FX-8, FX-16. FX-4 provides 4 service slots, 2 x 100 Gb/s per slot high-capacity backplane, and high-capacity 480Gb/s controllers (NT) with 40Gb/s network capacity (can be used as uplink, downlink or direct user link).
Shelf configuration of 7360 ISAM FX-4- Optional Network Termination Input Output (NTIO) for an additional 80Gb/s network capacity
- Full NT redundancy with Active/Active and load sharing options
- Added resiliency with MPLS, Ethernet Ring Protection Switching (ERPS) (G.8032) and Link Aggregation Group (LAG) support
- Simultaneous support of passive optical network (PON), pointto-point, POTS and VDSL2 with vectoring
- Fully managed by the Nokia 5520 Access Management System (AMS) and 5529 Access Provisioning Center (APC) applications
Nokia 7360 ISAM FX Series Model
7360 ISAM FX supports a mix of services including VDSL2 with vectoring, point-to-point, GPON, EPON (with DPoE) and 10G PON services. High-bandwidth throughput is guaranteed by backplane technology that enables dual 100Gb/s backplane connections to each line termination (LT) slot.
The 7360 ISAM FX system is a frame-based multi-service access platform, offering high-density fiber connections for multimedia, high-speed Internet access, voice, and business services. At the network side, the 7360 ISAM FX terminates FE, GE, or 10GE links. Following are possible configurations.
- Connect to one or more Ethernet switches. Ethernet links can be connected to one or more Ethernet switches. These Ethernet switches forward the frames over the Ethernet-based aggregation access network until they reach the IP edge router or BRAS of the corresponding NSP. At the IP edge router or BRAS, the frames enter the IP backbone of the NSP.
- Connect more than one FE/GE/10GE link (link aggregation). In case of more than one link, Ethernet link aggregation is used.
- Connect directly to an IP edge router. The 7360 ISAM FX can be connected directly to the IP edge router or BRAS. The Ethernet aggregation network is reduced to one or more parallel Ethernet links.
- Connect to a MPLS network. The 7360 ISAM FX is a multiplexer, which can be equipped with the following main cards:
· NT card (optionally 1+1 redundant): The 7360 ISAM FX NT cards consist of an IHub subsystem and a system control subsystem.
· NTIO card (optional) (not currently supported)
· LT cards implementing the user interfaces: The 7360 ISAM FX LT cards provide an IWF, a transport subsystem, and an LT control subsystem.
· GPON LT cards: The GPON functionality of the 7360 ISAM FX extends the system boundaries up to 128 ONTs over fiber that can reach tens of kilometers from the GPON LT cards located in a 7360 ISAM FX shelf. These GPON LT cards provide the physical interfaces from the 7360 ISAM FX shelf toward the CPE, or the Nokia ONTs.
· XG-PON1 LT cards: The XG-PON1 functionality of the 7360 ISAM FX provides higher speed data rates of 10G downstream and 2.5G updstream.
Product Specifications | |||
Switching capacity |
FANT-F: 480Gb/s switching matrix (bidirectional) |
||
High-capacity backplane |
2 x 100 Gb/s per slot | ||
Service Slots | 4 |
||
Board Supported | |||
Network Termination Card (NT card) |
|||
FANT-F |
480 Gbps NT card |
||
FANT-G | 1.2 TBps NT card | ||
NTIO card | |||
FNIO-A |
Eight additional external Ethernet interfaces: each supporting optical GE or 10GE ports |
||
Line Termination Card (LT card) | |||
NDLS-E | VDSL2 combined LT/splitter over POTS with SLV | ||
NDLS-F | Multi-DSL integrated splitter over POTS LT card with BLV | ||
NELT-B | 36-line Ethernet (FE/GE) LT card; NELT-B is an FE/GE LT card that has up to 36 FE/GE optical ports for Ethernet access. |
||
FELT-B | 36-line high speed Ethernet (FE/GE/2.5GE) LT card | ||
NGLT-A | GPON LT card with 8 GPON interfaces; NGLT-A is a GPON LT card that can be installed in a 7360 ISAM FX shelf. The NGLT-A provides termination of eight GPON ports (2.488 Gb/s downstream and 1.244 Gb/s upstream). SFP GPON optical modules can be plugged into
the NGLT-A card. |
||
NGLT-C | GPON LT card with 8 GPON interfaces ; NGLT-C is a GPON LT card that can be installed in a 7360 ISAM FX shelf. The NGLT-C provides termination of eight GPON ports (2.488 Gb/s downstream and 1.244 Gb/s upstream). SFP GPON optical modules can be plugged into
the NGLT-C card. |
||
NPOT-C | 48 port POTS only LT card | ||
FGLT-A |
GPON LT card with 16 GPON interfaces; FGLT-A is an GPON LT card that can be installed in a 7360 ISAM FX shelf. The FGLT-A provides termination of sixteen GPON ports (2.488 Gb/s downstream and 1.244Gb/s upstream). SFP GPON optical modules can be plugged into the FGLT-A card. |
||
FGLT-B | GPON LT card with 16 GPON interfaces | ||
FPLT-A | EPON LT card with 8 EPON interfaces | ||
FPLT-A | EPON LT card with 8 EPON interfaces | ||
FPXT-B | 10G EPON LT card with 8 10G EPON interfaces | ||
FWLT-A | LT card with 4 NG-PON2 TWDM interfaces | ||
FWLT-P | 8-port Asymmetric 10G GPON Board | ||
FWLT-B | 8-port Symmetric 10G GPON (XGS-PON/TWDM-PON) | ||
FGUT-A | 16-port Symmetric XGS-PON and GPON combo Board | ||
FWLT-C | 16-port Symmetric GPON/XGS-PON(TWDM-PON) board | ||
NDPS-B | Vector Processing Server card | ||
NVPS-C | POTS Voice Package Server card | ||
Device Specifications | |||
Dimensions (W x D x H) (mm) |
Height: 223 mm. (8.77 in) (5 RU) Width: 445 mm (17.52 in); can be used in 19-in. racks Depth: 280 mm (11.02 in) Rack-mounting pitch of 25 mm (0.984 in) |
||
Power supply |
Input – 48/60V DC nominal Fully redundant power feeding (branch A and B) |
||
Operating temperature range | -40⁰C to 65⁰C (-40⁰F to 149⁰F) | ||
Relative humidity | 5% to 93% (non-condensing) |
Alcatel-Lucent 7360 ISAM Series OLT
7360 ISAM FX shelves supported | |||
Item | 7360 ISAM FX-16 | 7360 ISAM FX-8 | 7360 ISAM FX-4 |
Code | 3FE 65209 BA | 3FE64936 BA | 3FE-64991 BA |
Maximum number of LT cards | 16 | 8 | 4 |
Maximum number of NT cards | 2 | 2 | 2 |
Maximum number of NTIO cards | 1 (optional) | 1 (optional) | 1 (optional) |
Mnemonic | NFXS-D | NFXS-E | NFXS-F |
Mounted in: 19 in. EIA racks | N | Y | Y |
Mounted in: 23 in. racks | Y | Y | Y |
Supported plug-in units in 7360 ISAM FX shelves | |||
Slot | Plug-in Unit | Description | |
NTA | FANT-F | 480 Gbps NT card | |
NTB | FANT-F | 480 Gbps NT card | |
LT slot | NELT-B | 36-line Ethernet (FE/GE) LT card | |
NGLT-A | GPON LT card with 8 GPON interfaces | ||
NGLT-C | GPON LT card with 8 GPON interfaces | ||
FGLT-A | GPON LT card with 16 GPON interfaces | ||
General facilities card | NGFC-G | GFC for 7360 ISAM FX-8 shelf | |
NGFC-H | GFC for 7360 ISAM FX-4 shelf | ||
Fan area | AFAN-H | NB Fan unit for 7360 ISAM FX-16 shelf | |
AFAN-E | Fan unit for 7360 ISAM FX-8 shelf | ||
AFAN-X | Fan unit for 7360 ISAM FX-4 shelf | ||
NT Redundancy support-ready hardware modules | |||
Type | Module | ||
Shelf | NFXS-D NFXS-E NFXS-F |
||
NT cards | FANT-F | ||
LT cards | NELT-B | ||
NGLT-A | |||
NGLT-C | |||
FGLT-A |
GPON,10G XG-PON and point-to-point support
Point-to-point | GPON | 10G PON |
36p FE/GE point-to-point 18 cages, dual-compact SFPs 20 Gb/s throughput in NNI mode SyncE support Residential, business services and mobile backhaul |
8-port 2.5G GPON SFP pluggable optics C+ optics option RSSI-capable optics PON feeder redundancy Residential, business services and mobile backhaul |
Four 10G XG-PON1 ports Class N1 optics RSSI-capable optics PON feeder redundancy Up to 1:256 split ratio support Residential, business services and mobile backhaul |