Huawei NE40E-X3 Router
- Full Set of Accessories
- Firmware & Software Testing
- License Available
- Category:Huawei,NE40E Series,Router
Huawei NE40E-X3 Subrack including Dual AC/DC Power Options
Huawei NE40E series are high-end Ethernet network products that are developed based on the VRP routing platform and focus on the access, aggregation, and transmission of metro Ethernet services.
Slot Layout of the NE40E-X3
Specifications of the CR5B0BKP0370_NE40E-X3 Integrated AC Chassis (5 U)
| Item | Specification |
| Cabinet installation standards | Can be installed in a standard 19" 800 mm-deep cabinet. A Huawei 2.2 m-high N68E cabinet is used by default. |
| Dimensions without packaging (H x W x D) [mm(in.)] | 220 mm x 442 mm x 650 mm (8.66 in. x 17.40 in. x 25.59 in.) |
| Chassis height [U] | 5 U |
| Weight without packaging [kg(lb)] | 25 kg (55.12 lb) |
| Weight without packaging (full configuration) [kg(lb)] | 52 kg (114.64 lb) |
| Typical power consumption (with configuration) [W] | 950 W (fully configured with LPUF-51s) |
| 1070 W (fully configured with LPUF-120s) | |
| 1386 W (fully configured with LPUF-241s) | |
| Typical heat dissipation (with configuration) [BTU/hour] | 3082.2 BTU/hour (fully configured with LPUF-51s) |
| 3471.5 BTU/hour (fully configured with LPUF-120s) | |
| 4496.8 BTU/hour (fully configured with LPUF-241s) | |
| MTBF [year] | 27.44 year |
| MTTR [hour] | 0.5 hour |
| Availability | 0.99999792 |
| Power supply mode | AC built-in |
| Maximum number of power chassis inputs | (1 channel/PEM)*2 PEM=2 channels |
| Rated input voltage [V] | 200 V to 240 V |
| Input voltage range [V] | 180 V to 264 V |
| Maximum input current [A] | 12A/single-module |
| Maximum input cable size [mm²] | Standard C19 cable |
| Front-end circuit breaker/fuse [A] | 16 A |
| Noise at normal temperature (acoustic power) [dB(A)] | ETSI-compliance (<72dBA @ 23°C (73.4°F)) |
| Number of slots | 5 |
| Number of service board slots | 3 |
| Switching capacity | 1.08 Tbit/s |
| Redundant MPUs | 1:01 |
| Redundant power supply | 1+1 |
| Redundant fans | Support for proper fan operation in case of a single fan failure for a short period at 40°C (104°F) |
| Long-term operating temperature [°C(°F)] | 0°C to 45°C (32°F to 113°F) |
| Short-term operating temperature [°C(°F)] | -5°C to 55°C (23°F to 131°F) |
| Restriction on the operating temperature variation rate [°C(°F)] | ≤ 0.5°C/min (32.9°F/min), non-condensing |
| Storage temperature [°C(°F)] | -40°C to 70°C (-40°F to 158°F) |
| Long-term operating relative humidity [RH] | 5% RH to 85% RH, non-condensing |
| Short-term operating relative humidity [RH] | 5% RH to 95% RH, non-condensing |
| Storage relative humidity [RH] | 5% RH to 95% RH, non-condensing |
| Long-term operating altitude [m(ft.)] | ≤ 4000 m (13123.36 ft.) (From 1800 m to 4000 m [5905.51 ft. to 13123.36 ft.], the operating temperature of the device decreases by 1°C [1.8°F] for every 220 m [721.78 ft.] increase in altitude.) |
| Storage altitude [m(ft.)] | < 5000 m (16404 ft.) |
Huawei NE40E-X3 Subrack including Dual AC/DC Power Options
Huawei NE40E series are high-end Ethernet network products that are developed based on the VRP routing platform and focus on the access, aggregation, and transmission of metro Ethernet services.
Slot Layout of the NE40E-X3
Specifications of the CR5B0BKP0370_NE40E-X3 Integrated AC Chassis (5 U)
| Item | Specification |
| Cabinet installation standards | Can be installed in a standard 19" 800 mm-deep cabinet. A Huawei 2.2 m-high N68E cabinet is used by default. |
| Dimensions without packaging (H x W x D) [mm(in.)] | 220 mm x 442 mm x 650 mm (8.66 in. x 17.40 in. x 25.59 in.) |
| Chassis height [U] | 5 U |
| Weight without packaging [kg(lb)] | 25 kg (55.12 lb) |
| Weight without packaging (full configuration) [kg(lb)] | 52 kg (114.64 lb) |
| Typical power consumption (with configuration) [W] | 950 W (fully configured with LPUF-51s) |
| 1070 W (fully configured with LPUF-120s) | |
| 1386 W (fully configured with LPUF-241s) | |
| Typical heat dissipation (with configuration) [BTU/hour] | 3082.2 BTU/hour (fully configured with LPUF-51s) |
| 3471.5 BTU/hour (fully configured with LPUF-120s) | |
| 4496.8 BTU/hour (fully configured with LPUF-241s) | |
| MTBF [year] | 27.44 year |
| MTTR [hour] | 0.5 hour |
| Availability | 0.99999792 |
| Power supply mode | AC built-in |
| Maximum number of power chassis inputs | (1 channel/PEM)*2 PEM=2 channels |
| Rated input voltage [V] | 200 V to 240 V |
| Input voltage range [V] | 180 V to 264 V |
| Maximum input current [A] | 12A/single-module |
| Maximum input cable size [mm²] | Standard C19 cable |
| Front-end circuit breaker/fuse [A] | 16 A |
| Noise at normal temperature (acoustic power) [dB(A)] | ETSI-compliance (<72dBA @ 23°C (73.4°F)) |
| Number of slots | 5 |
| Number of service board slots | 3 |
| Switching capacity | 1.08 Tbit/s |
| Redundant MPUs | 1:01 |
| Redundant power supply | 1+1 |
| Redundant fans | Support for proper fan operation in case of a single fan failure for a short period at 40°C (104°F) |
| Long-term operating temperature [°C(°F)] | 0°C to 45°C (32°F to 113°F) |
| Short-term operating temperature [°C(°F)] | -5°C to 55°C (23°F to 131°F) |
| Restriction on the operating temperature variation rate [°C(°F)] | ≤ 0.5°C/min (32.9°F/min), non-condensing |
| Storage temperature [°C(°F)] | -40°C to 70°C (-40°F to 158°F) |
| Long-term operating relative humidity [RH] | 5% RH to 85% RH, non-condensing |
| Short-term operating relative humidity [RH] | 5% RH to 95% RH, non-condensing |
| Storage relative humidity [RH] | 5% RH to 95% RH, non-condensing |
| Long-term operating altitude [m(ft.)] | ≤ 4000 m (13123.36 ft.) (From 1800 m to 4000 m [5905.51 ft. to 13123.36 ft.], the operating temperature of the device decreases by 1°C [1.8°F] for every 220 m [721.78 ft.] increase in altitude.) |
| Storage altitude [m(ft.)] | < 5000 m (16404 ft.) |
Specifications of the CR52-BKPE-4U-DC_NE40E-X3 Integrated DC Chassis(4 U)
| Item | Specification |
| Cabinet installation standards | Can be installed in a standard 19" 800 mm-deep cabinet. A Huawei 2.2 m-high N68E cabinet is used by default. |
| Dimensions without packaging (H x W x D) [mm(in.)] | 175 mm x 442 mm x 650 mm (6.89 in. x 17.40 in. x 25.59 in.) |
| Chassis height [U] | 4 U |
| Weight without packaging [kg(lb)] | 15 kg (33.07 lb) |
| Weight without packaging (full configuration) [kg(lb)] | 42 kg (92.59 lb) |
| Typical power consumption (with configuration) [W] | 800 W (fully configured with LPUF-51s) |
| 920 W (fully configured with LPUF-120s) | |
| 1239 W (fully configured with LPUF-241s) | |
| Typical heat dissipation (with configuration) [BTU/hour] | 2595.5 BTU/hour (fully configured with LPUF-51s) |
| 2984.9 BTU/hour (fully configured with LPUF-120s) | |
| 4019.8 BTU/hour (fully configured with LPUF-241s) | |
| MTBF [year] | 27.44 year |
| MTTR [hour] | 0.5 hour |
| Availability | 0.99999792 |
| Power supply mode | DC built-in |
| Maximum number of power chassis inputs | (1 channel/PEM)*2 PEM=2 channels |
| Rated input voltage [V] | –48 V/ –60 V |
| Input voltage range [V] | –38.4 V to –72 V |
| Maximum input current [A] | 42 A/single-module |
| Maximum input cable size [mm²] | 25 mm² |
| Front-end circuit breaker/fuse [A] | 50 A |
| Noise at normal temperature (acoustic power) [dB(A)] | ETSI-compliance (<72dBA @ 23°C (73.4°F)) |
| Number of slots | 5 |
| Number of service board slots | 3 |
| Switching capacity | 1.08 Tbit/s |
| Redundant MPUs | 1:01 |
| Redundant power supply | 1+1 |
| Redundant fans | Support for proper fan operation in case of a single fan failure for a short period at 40°C (104°F) |
| Long-term operating temperature [°C(°F)] | 0°C to 45°C (32°F to 113°F) |
| Short-term operating temperature [°C(°F)] | -5°C to 55°C (23°F to 131°F) |
| Restriction on the operating temperature variation rate [°C(°F)] | ≤ 0.5°C/min (32.9°F/min), non-condensing |
| Storage temperature [°C(°F)] | -40°C to 70°C (-40°F to 158°F) |
| Long-term operating relative humidity [RH] | 5% RH to 85% RH, non-condensing |
| Short-term operating relative humidity [RH] | 5% RH to 95% RH, non-condensing |
| Storage relative humidity [RH] | 5% RH to 95% RH, non-condensing |
| Long-term operating altitude [m(ft.)] | ≤ 4000 m (13123.36 ft.) (From 1800 m to 4000 m [5905.51 ft. to 13123.36 ft.], the operating temperature of the device decreases by 1°C [1.8°F] for every 220 m [721.78 ft.] increase in altitude.) |
GLOBAL SHIPPING
XponShop offers you various options of shipping ways:
-EXW SHENZHEN
-Overseas Express which includes shipping by Carriers, by Air Cargo, and Sea Freight.
| Cargo Weight/Volume | Suggested Shipping Ways | Comments |
| ≤ 45KGS | By Shipping Carriers (DHL, UPS, FedEx, etc.) | Door to door service, fast and convenient. |
| ＞45KGS | By Air Cargo | Door to airport service, more cost-efficient. |
| ＞1CBM | By Sea Freight | Large-volume goods, door to seaport service, longer shipping time but cheaper. |
XponShop makes the most commonly used trade terms available for your convenience: CNF, CPT, CIF, DDP, etc to ensure global fast and convenient delivery.
Once you confirm your order, you may contact XponShop team for calculating the freight charges and choose the optimal shipping way.
NOTE:
· Shipping may be subject to local taxes or duties; XponShop is not responsible for and has no control over these charges.
· No matter which shipping ways you chose, cargo insurance is highly recommended in case of unpredictable loss.
RETURN POLICY
We aim to deliver products for your appreciation and satisfaction. XponShop return or replacement policy applies only if the product is damaged or incorrectly delivered.
–If you receive a damaged product or it is different from the one requested, you can return or replace it within 7 days of receipt. In such a case, costs shall be borne by XponShop.
–If the product is malfunctional during use and under 12 months warranty, XponShop support team will contact you to troubleshoot the issue by professional diagnosis. The unsolvable problem will trigger the return procedure: repair, replace and reship to you or refund if repair or replacement is inapplicable.
NOTE:
· Please be aware that the product must be returned to the specified address as defined by shipping incoterms against the sales invoice/contract.
· For further information about how to return products, please contact our XponShop team at sales@xponshop.com, we will advise you on how to proceed.
Related items
Huawei NE8000 M8 Router
- Full Set of Accessories
- Firmware & Software Testing
- License Available
Huawei ME60-X8A Router
- Full Set of Accessories
- Firmware & Software Testing
- License Available
Huawei ME60-X3 Router
- Full Set of Accessories
- Firmware & Software Testing
- License Available
Huawei ME0D00MPUD72 Main Processing Card
- Latest Firmware Loaded
- Board Functional Testing
Huawei ME0D00MPUD71 Main Processing Card
- Latest Firmware Loaded
- Board Functional Testing
Huawei ME0DBSUFF070 Flexible Card
- Board Functional Testing
- Hardware Compatibility Testing
Huawei ME0DBSUF5170 Flexible Card
- Board Functional Testing
- Hardware Compatibility Testing
Huawei ME0DMSUFA070 Flexible Card
- Board Functional Testing
- Hardware Compatibility Testing
Huawei ME0DBSUFA070 Flexible Card
- Board Functional Testing
- Hardware Compatibility Testing
