Huawei MA5800 X2 NG OLT H901BPSB subrack, belonging to Huawei SmartAX MA5800 series OLT products includes the MA5800-X17, MA5800-X15, MA5800-X7, and MA5800-X2 in Huawei FTTH solution.
It is positioned as the next-generation OLT for NG-PON
It is designed to help carriers build networks with larger bandwidths, higher speeds, and smarter connectivity to deliver a better service experience
Provides GPON, 10G PON (including XG-PON and XGS-PON), P2P 10GE/GE access
Supports deployment on FTTH, FTTD, FTTB, and FTTC networks
Functions as a large-capacity aggregation device on the network to aggregate the traffic from ONTs, MDUs, and campus switches, thereby simplifying the network architecture and reducing the OPEX.
Supports distributed cache for fast 4K/8K video start or channel zapping
Supports the PON combo technology, and can work with the built-in WDM1r optical module to support smooth evolution from GPON to XG(S)-PON
Specification
| Product Specifications | |||
| Switching capacity of the system | 480 Gbit/s | ||
| Maximum bandwidth per slot | |||
| Maximum number of MAC address | 262144 | ||
| Maximum number of ARP/routing entries | 65536 | ||
| Maximum number of concurrent 4K video users | 2000 | ||
| GPON ports | 32 | ||
| XG-PON ports | 32 | ||
| XGS-GPON ports | 16 | ||
| GE/FE ports | 96 | ||
| 10GE ports | 16 | ||
| Cabinet supported | N63E-22 | ||
| Board Supported | |||
| Control Board | |||
| MPSG |
It provides 2 GE/10GE and 2GE upstream transmission ports and supports load sharing. NOTE: MPSG shares the same specification and performance as MPSA except that MPSG doesn't support the Sync ETH clock, 1588v2 Synchronization and 1588ACR function. |
||
| MPSC | It provides 4 GE/10GE upstream transmission ports and supports load sharing. By default, MA5800 connects to upstream network through the control board | ||
| MPSA | It provides 2 GE/10GE and 2GE upstream transmission ports and supports load sharing. By default, MA5800 connects to upstream network through the control board | ||
| Upstream interface board | |||
| NXED | Enhanced 8-port 10GE upastream interface board, supporting 10GE/GE Ethernet upstream transmission. NXED is used when upstream ports currently provided in MA5800 are not enough. | ||
| PON Service Board | |||
| GPHF | Provides 16 GPON ports for access services | ||
| CGHF | Provides 16-port XG-PON and GPON Combo ports for home access services | ||
| CSHF | Provides 16-port XGS-PON and GPON Combo ports for home access services | ||
| FLHF | Provides GPON, XG(S)-PON, and XG(S)-PON&GPON Combo ports for home access services | ||
| GPSF | Provides 16 GPON ports for home access services | ||
| XGHD | Provides 8 asymmetric 10G GPON ports for access services. | ||
| TWED | Provides 8 symmetric 10G GPON ports for access services. | ||
| EDSH | 32-channel E1 upstream board, supporting native TDM mode. | ||
| OGHK | 48-port aggregated GE/FE optical interface board, supporting up to 48 channels of GE/FE | ||
| OXHD | 8-port aggregated 10GE optical interface board, supporting GE/10GE Ethernet aggregation. | ||
| Power board | |||
| PISA | Provides -48V DC input | ||
| PISB | Provides one AC power input and supports battery for power backup. | ||
| Fan Monitoring board | |||
| FMSA | Supplier power to fans; controls and moniotes the fans | ||
| Physical Specifications | |||
| Dimensions (W x D x H) (mm) |
2 U high and 19 inch wide442 mm x 268.7 mm x 88.1 mm Including IEC mounting brackets: 482.6 mm x 268.7 mm x 88.1 mm |
||
| Maximum weight(including mounting brackets) | 9.4 kg | ||
| Maximum input current | 20 A |
||
| Power supply | Power supply mode: DC Working voltage range: -38.4 V to -72 V Rated voltage: -48 V / -60 V |
||
| Ambient temperature | -40°C to +65°C The MA5800 can start up at a lowest The MA5800 can start up at a lowest temperature of -25°C and run at -40°C. Note:The 65°C temperature refers to the highest temperature measured at the air intake vent of service subrack. |
||
| Ambient humidity | 5% RH to 95% RH | ||
