Huawei S5720-52X-PWR-SI-ACF Switch
- Brand New Condition
- Original Box Packed
- Latest Firmware Version
- Category:Huawei,Huawei Switch,S5700 Series
Huawei S5720-52X-PWR-SI-ACF switch with 48-port 1000BASE-T POE+, 4-port 10GE SFP+, 2 power slots
Forwarding performance: 132 Mpps
Switching capacity: 336Gbps
16K MAC address entries
POE supported
Huawei S5720-SI Flexible Gigabit Ethernet switches that provide resilient, high-density Layer 3 switching for data centers. Features include multiple-terminals, HD video security, and video conferencing applications. Intelligent iStack clustering, 10 Gbit/s upstream ports and IPv6 forwarding enable use as aggregation switches in enterprise campus networks.
Next-generation reliability, security, and energy-saving technologies make S5720-SI Series Switches easy to install and maintain, and an excellent source of low Total Cost of Ownership (TCO).
Item | Description |
Fixed port | 48*Ethernet 10/100/1000 PoE+ ports, 4*10 Gig SFP+ |
Forwarding performance | 132Mpps |
Extended slot | NA |
MAC address table | IEEE 802.1d compliance |
16K MAC address entries | |
MAC address learning and aging | |
Static, dynamic, and black hole MAC address entries | |
Packet filtering based on source MAC addresses | |
VLAN | 4K VLANs |
Guest VLAN and voice VLAN | |
GVRP | |
MUX VLAN | |
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports | |
1:1 and N:1 VLAN mapping | |
Jumbo frame | 10K |
Ring protection | RRPP ring topology and RRPP multi-instance |
Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover |
|
SEP, ERPS(G.8032) | |
STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s) | |
BPDU protection, root protection, and loop protection | |
IP routing | Static route, RIPv1, RIPv2, RIPng, ECMP, OSPF, OSPFv3, BGP, BGP4+, ISIS, ISISv6, VRRP, VRRP6 |
IPv6 features | Neighbor Discovery (ND) |
Path MTU (PMTU), MLD v1/v2 snooping | |
IPv6 ping, IPv6 tracert, and IPv6 Telnet | |
6 to4 tunnel, ISATAP tunnel, and manually configured tunnel | |
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type |
|
6to4 tunnel, ISATAP tunnel, and manually configured tunnel | |
Multicast forwarding | PIM DM, PIM SM, PIM SSM |
IGMP v1/v2/v3 snooping and IGMP fast leave | |
Multicast forwarding in a VLAN and multicast replication between VLANs | |
Multicast load balancing among member ports of a trunk | |
Controllable multicast | |
Port-based multicast traffic statistics | |
QoS/ACL | Rate limiting on packets sent and received by an interface |
Packet redirection | |
Port-based traffic policing and two-rate three-color CAR | |
Eight queues on each port | |
WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms | |
Re-marking of the 802.1p priority and DSCP priority | |
Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source | |
MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID |
|
Rate limiting in each queue and traffic shaping on ports | |
Security | User privilege management and password protection |
DoS attack defense, ARP attack defense, and ICMP attack defense | |
Binding of the IP address, MAC address, interface, and VLAN | |
Port isolation, port security, and sticky MAC | |
Blackhole MAC address entries | |
MAC Forced Forwarding (MFF) | |
Limit on the number of learned MAC addresses | |
802.1x authentication and limit on the number of users on an interface | |
AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH v2.0 |
|
Hypertext Transfer Protocol Secure (HTTPS), CPU defense, Blacklist and whitelist | |
802.1x authentication, MAC address authentication, and combined authentication on a per port basi |
|
Portal authentication on a per VLANIF interface basis, MACSec(hardware ready) | |
OAM | Software OAM: |
EFM OAM | |
CFM OAM | |
CFM OAM | |
Super Virtual Fabric (SVF) | Working as an SVF client that is plug-and-play with zero configuration |
Automatically loading the system software package and patches of clients | |
One-click and automatic delivery of service configurations | |
Supports independent running client | |
Management and Maintenance |
iStack, Virtual cable test, SNMP v1/v2c/v3, RMON |
Web-based NMS | |
System logs and alarms of different levels | |
sFlow | |
LLDP/LLDP-MED | |
Interoperability | Supports VBST (Compatible with PVST/PVST+/RPVST) |
Supports LNP (Similar to DTP) | |
Supports VCMP (Similar to VTP) | |
Operating environment | Operating temperature: 0-1800 m altitude: 0-45℃ 1800-5000 m altitude: The operating temperature reduces by 1℃ every time the altitude increases by 220 m. Relative humidity: 5% to 95% (non-condensing) |
Input voltage | AC: Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 50/60 Hz |
Dimensions (mm) | 442 (W) x 507(D)x 43.6 (H) |
Typical power consumption |
without PD: 57W; with PD: <1631.5W (PoE:1440W) |
PN. | 02350DLY |
Huawei S5720-52X-PWR-SI-ACF switch with 48-port 1000BASE-T POE+, 4-port 10GE SFP+, 2 power slots
Forwarding performance: 132 Mpps
Switching capacity: 336Gbps
16K MAC address entries
POE supported
Huawei S5720-SI Flexible Gigabit Ethernet switches that provide resilient, high-density Layer 3 switching for data centers. Features include multiple-terminals, HD video security, and video conferencing applications. Intelligent iStack clustering, 10 Gbit/s upstream ports and IPv6 forwarding enable use as aggregation switches in enterprise campus networks.
Next-generation reliability, security, and energy-saving technologies make S5720-SI Series Switches easy to install and maintain, and an excellent source of low Total Cost of Ownership (TCO).
Item | Description |
Fixed port | 48*Ethernet 10/100/1000 PoE+ ports, 4*10 Gig SFP+ |
Forwarding performance | 132Mpps |
Extended slot | NA |
MAC address table | IEEE 802.1d compliance |
16K MAC address entries | |
MAC address learning and aging | |
Static, dynamic, and black hole MAC address entries | |
Packet filtering based on source MAC addresses | |
VLAN | 4K VLANs |
Guest VLAN and voice VLAN | |
GVRP | |
MUX VLAN | |
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports | |
1:1 and N:1 VLAN mapping | |
Jumbo frame | 10K |
Ring protection | RRPP ring topology and RRPP multi-instance |
Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover |
|
SEP, ERPS(G.8032) | |
STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s) | |
BPDU protection, root protection, and loop protection | |
IP routing | Static route, RIPv1, RIPv2, RIPng, ECMP, OSPF, OSPFv3, BGP, BGP4+, ISIS, ISISv6, VRRP, VRRP6 |
IPv6 features | Neighbor Discovery (ND) |
Path MTU (PMTU), MLD v1/v2 snooping | |
IPv6 ping, IPv6 tracert, and IPv6 Telnet | |
6 to4 tunnel, ISATAP tunnel, and manually configured tunnel | |
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type |
|
6to4 tunnel, ISATAP tunnel, and manually configured tunnel | |
Multicast forwarding | PIM DM, PIM SM, PIM SSM |
IGMP v1/v2/v3 snooping and IGMP fast leave | |
Multicast forwarding in a VLAN and multicast replication between VLANs | |
Multicast load balancing among member ports of a trunk | |
Controllable multicast | |
Port-based multicast traffic statistics | |
QoS/ACL | Rate limiting on packets sent and received by an interface |
Packet redirection | |
Port-based traffic policing and two-rate three-color CAR | |
Eight queues on each port | |
WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms | |
Re-marking of the 802.1p priority and DSCP priority | |
Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source | |
MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID |
|
Rate limiting in each queue and traffic shaping on ports | |
Security | User privilege management and password protection |
DoS attack defense, ARP attack defense, and ICMP attack defense | |
Binding of the IP address, MAC address, interface, and VLAN | |
Port isolation, port security, and sticky MAC | |
Blackhole MAC address entries | |
MAC Forced Forwarding (MFF) | |
Limit on the number of learned MAC addresses | |
802.1x authentication and limit on the number of users on an interface | |
AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH v2.0 |
|
Hypertext Transfer Protocol Secure (HTTPS), CPU defense, Blacklist and whitelist | |
802.1x authentication, MAC address authentication, and combined authentication on a per port basi |
|
Portal authentication on a per VLANIF interface basis, MACSec(hardware ready) | |
OAM | Software OAM: |
EFM OAM | |
CFM OAM | |
CFM OAM | |
Super Virtual Fabric (SVF) | Working as an SVF client that is plug-and-play with zero configuration |
Automatically loading the system software package and patches of clients | |
One-click and automatic delivery of service configurations | |
Supports independent running client | |
Management and Maintenance |
iStack, Virtual cable test, SNMP v1/v2c/v3, RMON |
Web-based NMS | |
System logs and alarms of different levels | |
sFlow | |
LLDP/LLDP-MED | |
Interoperability | Supports VBST (Compatible with PVST/PVST+/RPVST) |
Supports LNP (Similar to DTP) | |
Supports VCMP (Similar to VTP) | |
Operating environment | Operating temperature: 0-1800 m altitude: 0-45℃ 1800-5000 m altitude: The operating temperature reduces by 1℃ every time the altitude increases by 220 m. Relative humidity: 5% to 95% (non-condensing) |
Input voltage | AC: Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 50/60 Hz |
Dimensions (mm) | 442 (W) x 507(D)x 43.6 (H) |
Typical power consumption |
without PD: 57W; with PD: <1631.5W (PoE:1440W) |
PN. | 02350DLY |
GLOBAL SHIPPING
XponShop offers you various options of shipping ways:
-EXW SHENZHEN
-Overseas Express which includes shipping by Carriers, by Air Cargo, and Sea Freight.
Cargo Weight/Volume | Suggested Shipping Ways | Comments |
≤ 45KGS | By Shipping Carriers (DHL, UPS, FedEx, etc.) | Door to door service, fast and convenient. |
>45KGS | By Air Cargo | Door to airport service, more cost-efficient. |
>1CBM | By Sea Freight | Large-volume goods, door to seaport service, longer shipping time but cheaper. |
XponShop makes the most commonly used trade terms available for your convenience: CNF, CPT, CIF, DDP, etc to ensure global fast and convenient delivery.
Once you confirm your order, you may contact XponShop team for calculating the freight charges and choose the optimal shipping way.
NOTE:
· Shipping may be subject to local taxes or duties; XponShop is not responsible for and has no control over these charges.
· No matter which shipping ways you chose, cargo insurance is highly recommended in case of unpredictable loss.
RETURN POLICY
We aim to deliver products for your appreciation and satisfaction. XponShop return or replacement policy applies only if the product is damaged or incorrectly delivered.
–If you receive a damaged product or it is different from the one requested, you can return or replace it within 7 days of receipt. In such a case, costs shall be borne by XponShop.
–If the product is malfunctional during use and under 12 months warranty, XponShop support team will contact you to troubleshoot the issue by professional diagnosis. The unsolvable problem will trigger the return procedure: repair, replace and reship to you or refund if repair or replacement is inapplicable.
NOTE:
· Please be aware that the product must be returned to the specified address as defined by shipping incoterms against the sales invoice/contract.
· For further information about how to return products, please contact our XponShop team at sales@xponshop.com, we will advise you on how to proceed.