Huawei S5730-68C-SI-AC Switch
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

Huawei S5730-68C-SI-AC Switch

  • Brand New Condition
  • Original Box Packed
  • Latest Firmware Version
Image
Available:In Stock
$0.00

Huawei S5730-68C-SI-AC switch with 48-port 1000BASE-T, 4-port 10GE SFP+, 2 power slots PN#98010713

Forwarding performance: 240 Mpps

Switching capacity: 680Gbps

32K MAC address entries

With 1 extension slot

PoE Not Supported

   

The S5730-SI series switches (S5730-SI for short) are next-generation standard gigabit Layer 3 Ethernet switches. They can be used as an access or aggregation switch on a campus network or as an access switch in a data center. The S5730-SI series switches provide flexible full gigabit access and cost-effective fixed GE/10 GE uplink ports.
Meanwhile, the S5730-SI can provide 4 x 40 GE uplink ports with an interface card.
    
   
Item Description
Fixed ports 48×10/ 100/1000 Base-T, 4×10 Gig SFP+
MAC address table 32K MAC
Dimensions mm (W×D ×H) 442× 420× 44.4
Slot One extended slot that supports an interface card:4*40 GE QSFP+ interface card
Input voltage AC: Rated AC voltage: 100-240V AC;50/60Hz Max AC voltage: 90-264V AC;47-63Hz;

DC: Rated DC power: -48- -60V DC Max DC voltage: -36- -72V DC
Maximum power consumption 65.4W(Without card)
Typical power consumption (Without PD) 42.3W (Without card)
Operating temperature 0 m-1800 m altitude:0-45°C(long term);-5°C to 50°C (short term)
1800-5000 m altitude: The operating temperature reduces by 1°C every time the
altitude increases by 220 m
Relative humidity 5% to 95% (non-condensing)
Heat dissipation Heat dissipation using fans supporting intelligent speed adjustment
MAC address table IEEE 802.1d compliance

32K MAC address entries

MAC address learning and aging

Static, dynamic, and blackhole MAC address entries

Packet filtering based on source MAC addresses
VLAN 4K VLANs

 Guest VLAN and voice VLAN

GVRP

MUX VLAN

VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports 1:1 and N:1 VLAN mapping
Reliability RRPP ring topology and RRPP multi-instance

 Smart Link tree topology and Smart Link multi-instance, providing millisecond-level

protection switchover

SEP

STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)

ERPS (G.8032)

BPDU protection, root protection, and loop protection
Interoperability VLAN-Based Spanning Tree (VBST), working with PVST, PVST+, and RPVST

 Link-type Negotiation Protocol (LNP), similar to DTP

VLAN Central Management Protocol (VCMP), similar to VTP
IP routing Static route, RIPv1/v2, RIPng, OSPF, OSPFv3, ECMP, IS-IS, IS-ISv6, BGP, BGP4+, VRRP, and VRRP6
Multicast PIM DM, PIM SM, PIM SSM

 IGMP v1/v2/v3,IGMP v1/v2/v3 snooping and IGMP fast leave

MLD v1/v2 and MLD v1/v2 snooping

Multicast forwarding in a VLAN and multicast replication between VLANs

Multicast load balancing among member ports of a trunk Controllable multicast

Port-based multicast traffic statistics
IPv6 features Neighbor Discovery (ND)

 Path MTU (PMTU)

IPv6 ping, IPv6 tracert, and IPv6 Telnet

6to4 tunnel, ISATAP tunnel, and manually configured tunnel

ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type
QoS/ACL Rate limiting on packets sent and received by a port

 Packet redirection

Port-based traffic policing and two-rate three-color CAR Eight queues on each port

WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms

Re-marking of the 802.1p priority and DSCP priority

Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID

Rate limiting in each queue and traffic shaping on ports
Security Hierarchical user management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense

 Binding of the IP address, MAC address, port number, and VLAN ID of a user

Port isolation, port security, and sticky MAC

MFF

Blackhole MAC address entries

Limit on the number of learned MAC addresses

IEEE 802.1x authentication and limit on the number of users on a port

AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC SSH

v2.0

HTTPS CPU defense

Blacklist and whitelist

IEEE 802.1x authentication, MAC address authentication, and Portal authentication

DHCPv4/v6 client/relay/server/snooping Attack source tracing and punishment for IPv6 packets such as ND, DHCPv6, and MLD packets
SVF Plug-and-play SVF client Automatic software and patch loading to clients

 One-click and automatic delivery of service configurations Independent client running
OAM Software OAM:

 EFM OAM

CFM OAM

Y.1731 performance test
Management and maintenance iStack

 Virtual cable test

SNMP v1/v2c/v3

RMON

Web-based NMS

System logs and alarms of different levels

802.3az EEE sFlow
Interoperability Supports VBST (Compatible with PVST/PVST+/RPVST) Supports LNP (Similar to DTP)

 Supports VCMP (Similar to VTP)
      

Huawei S5730-68C-SI-AC switch with 48-port 1000BASE-T, 4-port 10GE SFP+, 2 power slots PN#98010713

Forwarding performance: 240 Mpps

Switching capacity: 680Gbps

32K MAC address entries

With 1 extension slot

PoE Not Supported

   

The S5730-SI series switches (S5730-SI for short) are next-generation standard gigabit Layer 3 Ethernet switches. They can be used as an access or aggregation switch on a campus network or as an access switch in a data center. The S5730-SI series switches provide flexible full gigabit access and cost-effective fixed GE/10 GE uplink ports. Meanwhile, the S5730-SI can provide 4 x 40 GE uplink ports with an interface card.         
Item Description
Fixed ports 48×10/ 100/1000 Base-T, 4×10 Gig SFP+
MAC address table 32K MAC
Dimensions mm (W×D ×H) 442× 420× 44.4
Slot One extended slot that supports an interface card:4*40 GE QSFP+ interface card
Input voltage AC: Rated AC voltage: 100-240V AC;50/60Hz Max AC voltage: 90-264V AC;47-63Hz;

DC: Rated DC power: -48- -60V DC Max DC voltage: -36- -72V DC
Maximum power consumption 65.4W(Without card)
Typical power consumption (Without PD) 42.3W (Without card)
Operating temperature 0 m-1800 m altitude:0-45°C(long term);-5°C to 50°C (short term)
1800-5000 m altitude: The operating temperature reduces by 1°C every time the
altitude increases by 220 m
Relative humidity 5% to 95% (non-condensing)
Heat dissipation Heat dissipation using fans supporting intelligent speed adjustment
MAC address table IEEE 802.1d compliance

32K MAC address entries

MAC address learning and aging

Static, dynamic, and blackhole MAC address entries

Packet filtering based on source MAC addresses
VLAN 4K VLANs

 Guest VLAN and voice VLAN

GVRP

MUX VLAN

VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports 1:1 and N:1 VLAN mapping
Reliability RRPP ring topology and RRPP multi-instance

 Smart Link tree topology and Smart Link multi-instance, providing millisecond-level

protection switchover

SEP

STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)

ERPS (G.8032)

BPDU protection, root protection, and loop protection
Interoperability VLAN-Based Spanning Tree (VBST), working with PVST, PVST+, and RPVST

 Link-type Negotiation Protocol (LNP), similar to DTP

VLAN Central Management Protocol (VCMP), similar to VTP
IP routing Static route, RIPv1/v2, RIPng, OSPF, OSPFv3, ECMP, IS-IS, IS-ISv6, BGP, BGP4+, VRRP, and VRRP6
Multicast PIM DM, PIM SM, PIM SSM

 IGMP v1/v2/v3,IGMP v1/v2/v3 snooping and IGMP fast leave

MLD v1/v2 and MLD v1/v2 snooping

Multicast forwarding in a VLAN and multicast replication between VLANs

Multicast load balancing among member ports of a trunk Controllable multicast

Port-based multicast traffic statistics
IPv6 features Neighbor Discovery (ND)

 Path MTU (PMTU)

IPv6 ping, IPv6 tracert, and IPv6 Telnet

6to4 tunnel, ISATAP tunnel, and manually configured tunnel

ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type
QoS/ACL Rate limiting on packets sent and received by a port

 Packet redirection

Port-based traffic policing and two-rate three-color CAR Eight queues on each port

WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms

Re-marking of the 802.1p priority and DSCP priority

Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID

Rate limiting in each queue and traffic shaping on ports
Security Hierarchical user management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense

 Binding of the IP address, MAC address, port number, and VLAN ID of a user

Port isolation, port security, and sticky MAC

MFF

Blackhole MAC address entries

Limit on the number of learned MAC addresses

IEEE 802.1x authentication and limit on the number of users on a port

AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC SSH

v2.0

HTTPS CPU defense

Blacklist and whitelist

IEEE 802.1x authentication, MAC address authentication, and Portal authentication

DHCPv4/v6 client/relay/server/snooping Attack source tracing and punishment for IPv6 packets such as ND, DHCPv6, and MLD packets
SVF Plug-and-play SVF client Automatic software and patch loading to clients

 One-click and automatic delivery of service configurations Independent client running
OAM Software OAM:

 EFM OAM

CFM OAM

Y.1731 performance test
Management and maintenance iStack

 Virtual cable test

SNMP v1/v2c/v3

RMON

Web-based NMS

System logs and alarms of different levels

802.3az EEE sFlow
Interoperability Supports VBST (Compatible with PVST/PVST+/RPVST) Supports LNP (Similar to DTP)

 Supports VCMP (Similar to VTP)
      

GLOBAL SHIPPING
XponShop offers you various options of shipping ways:
-EXW SHENZHEN
-Overseas Express which includes shipping by Carriers, by Air Cargo, and Sea Freight.

Cargo Weight/Volume Suggested Shipping Ways Comments
≤ 45KGS By Shipping Carriers (DHL, UPS, FedEx, etc.) Door to door service, fast and convenient.
＞45KGS By Air Cargo Door to airport service, more cost-efficient.
＞1CBM By Sea Freight Large-volume goods, door to seaport service, longer shipping time but cheaper.

XponShop makes the most commonly used trade terms available for your convenience: CNF, CPT, CIF, DDP, etc to ensure global fast and convenient delivery.
Once you confirm your order, you may contact XponShop team for calculating the freight charges and choose the optimal shipping way.
NOTE:
· Shipping may be subject to local taxes or duties; XponShop is not responsible for and has no control over these charges.
· No matter which shipping ways you chose, cargo insurance is highly recommended in case of unpredictable loss.

RETURN POLICY
We aim to deliver products for your appreciation and satisfaction. XponShop return or replacement policy applies only if the product is damaged or incorrectly delivered.
–If you receive a damaged product or it is different from the one requested, you can return or replace it within 7 days of receipt. In such a case, costs shall be borne by XponShop.
–If the product is malfunctional during use and under 12 months warranty, XponShop support team will contact you to troubleshoot the issue by professional diagnosis. The unsolvable problem will trigger the return procedure: repair, replace and reship to you or refund if repair or replacement is inapplicable.
NOTE:
· Please be aware that the product must be returned to the specified address as defined by shipping incoterms against the sales invoice/contract.
· For further information about how to return products, please contact our XponShop team at sales@xponshop.com, we will advise you on how to proceed.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)